Hi again, thanks for your assistance but I'm afraid that I'm still
not following.

I have the following module and see no input to control the
attenuation...

http://www.analoguehaven.com/doepfer/a145/

--- In Doepfer_a100@yahoogroups.com , "ilanode" <techmeier@...> wrote:
>
> Sorry, for posting this twice. just have realized I missed a word
> which is now added:
>
> Hello Dan, Doepfer LFO-modules have no level controll for the output
> but most (if not each) *module* have at least one input with a
level
> control (attentuator). The VCFs have usually one input without
> attentuator (e.g. A122: CV1 for an 1/V response) and another one
with
> attentuator (e.g. CV2 for those CVs which does not need to comply
> with the 1/V standard). Regards, Ingo (not selfoscilating)
>
>
> --- In Doepfer_a100@yahoogroups.com , "ilanode" <techmeier@> wrote:
> >
> > Hello Dan, Doepfer LFO-modules have no level controll for the
> output
> > but most (if not each) have at least one input with a level
> control
> > (attentuator). The VCFs have usually one input without
attentuator
> > (e.g. A122: CV1 for an 1/V response) and another one with
> > attentuator (e.g. CV2 for those CVs which does not need to comply
> > with the 1/V standard). Regards, Ingo (not selfoscilating)
> >
> > --- In Doepfer_a100@yahoogroups.com , "danfarmer19732003"
> > <danfarmer@> wrote:
> > >
> > > Hi Ingo... when you say...
> > >
> > > "you can simply attenuate the lfo output, that would be the
> > simplest
> > > solution."
> > >
> > > What exactly do you mean All I see on my LFO's is a rate knob
> > that
> > > controls the rate of the LFO. Can you give me an example of how
> to
> > > attenuate the output
> > >
> > >
> > >
> > > >
> > > >
> > > > hello dan,
> > > >
> > > > you can simply attenuate the lfo output,
> > > > that would be the simplest solution.
> > > >
> > > > the more elaborated solution would be the use of
> > > > one or two a172 max/min modules together with an
> > > > a176 voltage source, thats what i'm doing quite often.
> > > >
> > > > best wishes
> > > >
> > > > ingo
> > > >
> > > >
> > > >
> > > > --- In Doepfer_a100@yahoogroups.com , "danfarmer19732003"
> > > > <danfarmer@> wrote:
> > > > >
> > > > > Hi guys... I'm looking for what I might call a range
limiter
> > for
> > > my
> > > > > LFOs.
> > > > >
> > > > > What I want to do is limit the range of the LFO. For
> example,
> > if
> > > > I'm
> > > > > controlling the cutoff filter with the LFO I do not want
the
> > > filter
> > > > to
> > > > > close the filter 100%, I just still want some sound(s) to
> come
> > > > through.
> > > > > I'm finding that as it is right now, there is no EFFECT
> AMOUNT
> > > > control
> > > > > on the LFO's it just does a straight 0-100% range.
> > > > >
> > > > > The opposite is true as well, in some case where I do not
> want
> > > 100%
> > > > of
> > > > > the sounds to come through either. Meaning that I do not
> want
> > the
> > > > LFO
> > > > > opening up the cutoff filter 100%.... again some king of
> > EFFECT
> > > > AMOUNT
> > > > > control would be useful to me.
> > > > >
> > > > > Can the Deopfer A-136 do this If not what other module
can
> I
> > > was
> > > > > thinking if I routed the LFO through a filter and if that
> > filter
> > > > had
> > > > > bandpass, that that might do what I want.
> > > > >
> > > >
> > >
> >
>