Hi Florian,
yes that's possible on principle. But in this case the sync will work only
as long as a tone appears at the SH-101 audio output (i.e. as long as e.g. a
key is held down on the keyboard and the VCF, VCA and ADSR controls are set
to suitable values). As far as know the SH-101 has no offset control for the
final VCA to open the VCA but only an ADSR or gate mode for the VCA. I can't
remember if the 101 has a hold function that could be used instead of that.
Best wishes
Dieter Doepfer
> -----Ursprüngliche Nachricht-----
> Von:
Doepfer_a100@yahoogroups.com
> [mailto:
Doepfer_a100@yahoogroups.com
]Im Auftrag von Florian Anwander
> Gesendet: Montag, 24. Juli 2006 11:56
> An:
Doepfer_a100@yahoogroups.com
> Betreff: Re: AW: 1 Roland Sh-101 and Doepfer VCO sync
>
>
> Hi Dieter
>
>
> > This would require a hardware modification of the SH-101. I'd
> recommend this
> > only for users who are experienced with electronics and
> soldering. You have
> > to get the SH-101 schematics and find out the solder point of the SH-101
> > that has available the rectangle output of the VCO, and add a
> buffer and a
> > socket to your SH-101.
> If I understand you right this is the description of a SH-101 as Sync
> Master! This would be also possible with the plain line out of the
> SH-101 (Osc to narrow pulse, no subosc, Cutoff 100%) and a A-119 (or
> assumingly any buffer like module like A167,A175,...).
>
> But as I understand the original poster asked for using the SH-101 as
> Sync-Slave. This would really require modifying the SH-101.
>
> Florian
>
> >
> > Best wishes
> > Dieter Doepfer
> >
> >
> >>-----Ursprüngliche Nachricht-----
> >>Von:
Doepfer_a100@yahoogroups.com
> >>[mailto:
Doepfer_a100@yahoogroups.com
]Im Auftrag von beatboxgestapo
> >>Gesendet: Sonntag, 23. Juli 2006 00:11
> >>An:
Doepfer_a100@yahoogroups.com
> >>Betreff: 1 Roland Sh-101 and Doepfer VCO sync
> >>
> >>
> >>Hello,
> >>
> >> Does anyone have any ideas about the best way to sync the VCO of a
> >>Roland Sh-101 to the two A-110 VCOs of a Doepfer system
> >>Any input is much appreciated.
> >>
> >>
> >>Thank you,
> >>Beatboxgestapo
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
> --
> Florian Anwander |ConSol
> Tel. +49(89)45841-133 |Consulting&Solutions Software GmbH
> Fax +49(89)45841-111 |Franziskanerstr. 38, D-81669 München
> email:
florian.anwander@...
|
http://www.consol.de
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>