> 1. Anyone know the manufacturer and parts numbers for
> Doepfer/Analogue Solutions power connectors I've got
> some circuits I'd like to board up and incorporate in
> my puny rack.

If you mean the female connectors of the bus cables: these connectors are
called "IDC connectors" (female sockets for flat cable) and are available
from many manufacturers and suppliers. E.g. from Mouser (order no 164-9006
for the 10 pin and 164-9008 for the 16 pin version).

> 2. I noticed in the schematics I've seen for mod.
> synth power supplies, there isn't a lot of capacitance
> after the regulators (I haven't seen a schematic for
> any Doepfer PS's, mind you.) Is there any possible
> advantage for "stiffening" the power supply with an
> additional pair of e-lytics closer to the modules Any
> danger

The large capacitors have to be located before the voltage regulators, not
behind ! At the outputs of the regulators only small capacitors are required
as the regulation ("stiffening") is carried out by the voltage regulators
(integrated circuits) but not by the large capacitors.

Best wishes
Dieter Doepfer