Hi Robert,
the easiest way to do this is the use of an A-156 Quantizer module,
which has
the transpose function too.
Imo it is very useful to the A-155, like the A-154 too!
All the best
Axel

dr_boehm_lebt schrieb:

>
> Hello,
>
> I' ve got a question about transposing sequences with my Doepfer Mini
> Basis system. The sequencer A-155 with one multiple A-180 is also in
> the system.
>
> I'd like to add the pitch CV from the sequencer A-155 to the pitch CV
> from the keyboard (via MIDI-to-CV-module A-190), so I could transpose
> the sequence melodie with my MIDI keyboard.
>
> First I used the A-180 multiple to add CV from A-155 to that from
> A-190 and connect the summ of both to the CV-in of the oscillator. The
> result was a not understandable sequence of similiar tones - no
> sequence with the pitch I wanted. The CVs were not added in that way
> I'd like to.
>
> Then I add the both pitch CVs (A-155, A-190) with the A-138 mixer, the
> mixer's out connected to the CV-in of the oscillator - now it worked!
> The pitch of the sequence line could be transposed using the keyboard.
> So I decided that the A-180 must do something that cannot work
> especially with this both CVs (A-155, A-190).
>
> Question: what is the reason of the behaviour of the A-180 multiple
> module Is it possible to do some DIY-modification on the A-180 to use
> the multiple especially with A-155 and A-190
>
> Kindly regards
>
> Robert!
>
>