alright, the bbd worked fine int he beauty case on its own or with
other modules other than the wave multiplier.
the Wave Multiplier also works fine on its own....
so either the current draw value for the wave multiplier is wrong, or
there is something that makes the combination of this two modules in
the same case bad.
C.
--- In
Doepfer_a100@yahoogroups.com
, "Carlos" <bushwick@...> wrote:
>
> the wave multiplier works fine. but it is before the bbd in the power
> line so yeah might be sucking it up somehow. more tonight when I test
> the bbd on its own.
>
>
> anyone else has a bbd with any other module combination in their mini
> case
>
> --- In
Doepfer_a100@yahoogroups.com
, Anthony Rolando <goldenechos@>
> wrote:
> >
> >
> > Carlos, does the other module (wave mult) work properly when placed
> in the rack Perhaps that module is damaged and overdrawing the mini
> case supply causing the BBD not not function.
> >
> > Tony
> >
> > > To:
Doepfer_a100@yahoogroups.com
> > > From: bushwick@
> > > Date: Tue, 19 Aug 2008 19:08:22 +0000
> > > Subject: 1 Re: bbd and mini case problem - won't work
> > >
> > > Can't think what else it could be. like I said works perfectly
when I
> > > put it back into the rack.
> > >
> > > going to try the bbd on its own in the mini case later tonight
see if
> > > it works properly, if it does then it will be safe to say than
either
> > > the mini case current rating or some of the modules rating is wrong.
> > > if it doesn't then there might be something else that prevents
the bbd
> > > module from working in the mini-case...
> > >
> > > C.
> > >
> > > --- In
Doepfer_a100@yahoogroups.com
, achtung_999
> > > <heinrich.himmelwasser@> wrote:
> > > >
> > > > Hello Carlos,
> > > > I don't think the current can be the problem.
> > > > The 188-1 (4096) takes 80mA and the A137 takes 40mA.
> > > > That is 120 mA, well within the range of 200mA that the minicase
> > > powersupply
> > > > delivers...
> > > >
> > > > greetz,
> > > >
> > > > Ernst
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > On Tue, Aug 19, 2008 at 2:41 AM, Carlos <bushwick@> wrote:
> > > >
> > > > >
> > > > > I have a bbd module ( 4096 stages) I tried putting it in a mini
> > > > > case(beauty case) witha wave multiplier as they fit perfectly
> > > > > together in there but it doesn't seem to work correctly.
> > > > >
> > > > > Basically the clock is not working and it seems to be stuck at a
> > > > > really long delay, and can only get noise out of it instead
of the
> > > > > usual thick delay (but can still mix with initial signal)
> > > > >
> > > > > I put it back on my rack and it went to working perfectly.
> > > > >
> > > > > is there a reason/limitation for this module that won't allow
> it to
> > > > > work well in the mini case
> > > > >
> > > > > or is it simply that when those two modules are together they
> suck way
> > > > > too much current for the mini case supply
> > > > >
> > > > > C.
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> >
> > _________________________________________________________________
> > Be the filmmaker you always wanted to belearn how to burn a DVD
> with Windows®.
> >
http://clk.atdmt.com/MRT/go/108588797/direct/01/
> >
> > [Non-text portions of this message have been removed]
> >
>