I have bought and used the ones from Analog Haven and they work very
well. You have to make sure it is plugged together correctly - trace
the lines yourself, don't follow the pictures on the site (which used
to show wired in both ways). Connect it like the 3rd picture down on
the page ( http://www.analoguehaven.com/doepfer/asysadaptor/ ). As
you can see the red stripes DON'T line up on the cables. I also added
some electrical tape covering the exposed leads on the PCB in case it
flopped around and touched anything in the case.
The only other concern is the 1/2 a hp hole spacing difference from
Doepfer and AS modules. Expect a gap or break out the drill press!

-James

On Oct 22, 2008, at 9:05 AM, achtung_999 wrote:

> Hello list,
>
> There should be a Analogue Systems module coming my way soon.
> For me this is a first of having an other manufacturers module in
> my A100 system.
> I have read about the different power standard that AS uses. Most
> people tell me to not
> produce the ribbon cable convertor myself..
>
> Can anyone recommend a dealer selling these cables/boards. The ones
> at Analog Haven with
> the board look very good. At Schneiders Büro I could not find them
> in the database
> anymore.. Were they selling the same ones
>
> anyone
>
> Greetings,
>
> Ernst
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>