Hello Argitoth

> Ok, I finally understand a little bit how to restart my AS-VCOs. I
> took the square output of the A-146 LFO and when the square is
> positive, the AS-VCO stops. Then the square goes negative, the AS-VCO
> restarts.

Yes: as long as the sync-in has a voltage at the input, the VCO stops
oscillating. In the end the hardsync is nothing else than an electonic
switch which shortens the capacitor that is the core of the oscillator.
As long as a voltage (and the gate is a voltage) is fed into the input,
as long the capacitor will be shortened. That is why I said: you need a
"spike".

> Florian says that a gate-to-trigger conversion will work. However, if
> I ONLY have the A-162, will it be able to take a gate, turn it into a
> trigger, and not cause the AS-VCO to stop

I doubt, that the minimum duration (parameter "length") of the trigger
delay is short enough for a real not hearable reset. Still the waveform
will be flat for some 10th seconds. But ofcourse this is much better
than nothing. ;)

Florian