i tried an inverter, but as expected it doesnt work since itll just
invert the high voltage to a negative value.

What i need to do is change the 190 reset from high on stop and low on
start to low on stop and high on start (thats a tounge twister hehe)

at this point i've double checked the manual and it would seem this
isn't possible via config/midi cc

Paul

On Sat, Feb 13, 2010 at 1:50 PM, Sandy Brain < sandybrain@... > wrote:
> maybe you could use a separate inverter module
>
> On 13 Feb 2010, at 12:03, phono 1337 wrote:
>
>> seems this runs in reverse, when the midi clock is stopped the synced
>> machine starts and vice versa, this is obviously due to the reset jack
>> polarity, is it possible to change the reset polarity via the front
>> panel or midi cc I had a look around the manual and it doesn't seem
>> to mention it. Anyone have any tips
>>
>> Paul
>>
>> On Fri, Feb 12, 2010 at 11:56 PM, phono 1337 < phono1337@... >
>> wrote:
>> > im out of sync sockets and i've already put plenty of splitters
>> on the
>> > sync outs (msy2/mc202) so im wondering about using the A-190 clock
>> > outs as a din sync.
>> >
>> > Something like
>> >
>> > a190 clock out to pin 3 on the din connector
>> > a190 reset to pin 1 on the din connector
>> > a190 ground to pin 2 on the din connector
>> >
>> > if i set the reset polarity and clock divisor correct im confident
>> > this will work, has anyone ever tried this
>> >
>> > Paul
>> >
>>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>