Hello George,
thank you for your message!
I used another VCO and it worked.
I am wondering if there is a possibility of false contact If I was to check the modules on that regard, what/where should I look for
Many, many thanks!
Sophie
--- In
Doepfer_a100@yahoogroups.com
, "George P. Macklin" <junkrhythm@...> wrote:
>
> Hello Sophie,
>
> Please give a description of the patch you have set up and I'm sure someone can point you in the right direction.
>
> A good starting point would be to patch the CV output on the Kenton into one of the VCOs pitch inputs. Patch the VCO output to the VCA input. Patch the VCA output out to your monitoring system. Patch the GATE output from the Kenton to the TRIGGER/GATE input of an ADSR. Patch the ADSR output to the CV input of the VCA. You will have to adjust the VCA gain and ADSR to get everything to work properly.
>
>
> Cheers,
> George P. Macklin
> www.granularmatter.com
>
> Eurorack Modules
> www.toppobrillo.com
>
> On Jan 2, 2011, at 7:47 AM, "computergirl_21" <sophiebernhard@...> wrote:
>
> > Hello all,
> >
> > I just bought a used A-100 with the following modules :
> > 3 x A110 VCO
> > 1 x A112 Sampler/Wavetable Oscillator (superb)
> > 1 x A114 Dual Ring Modulator
> > 1 x A118 Noise / Ramdom generator
> > 1 x A121 VCF2 Multimode Filter
> > 1 x A120 VCF
> > 1 x A131 VCA
> > 1 x A134 VC Auto panner
> > 1 x A138 Linear Mixer
> > 3 x A140 Envelope Generator (ADSR)
> > 1 x A147 VC LFO
> > 1 x A145 LFO
> > 1 x A148 Dual Sample and Hold
> > 1 x A162 Dual Trigger / Delay
> >
> > Eventually, I'd like to use it with Silent Way and Numerology, but right now, I would just like to get started. I have a Kenton Pro Solo MkII and thought I could use it with a MIDI keyboard. So far, I cannot hear any sound⦠:-s
> > that is why I thought I would ask you all how I should proceed. I feel silly, but I am doing all by myself and sometimes, I just get stuck. Thanks for reading and a happy 2011 to you!
> >
> > Cheers
> > Sophie
> >
> >
>
>
> [Non-text portions of this message have been removed]
>