I wrote to Dieter Doepfer re A-123. His answer was that demand for the A-123 was too low so he quit producing them from a business point of view, regretting it himself as he thinks a 24 db high pass is very important, too.

Sooooo, Dieter are you listening :-) I would like to see a new poll on whether this group thinks there should be a filter module with or including (multimode) a 4-pole high pass output (or even 6-pole, too, like Cwejman ).
It surely would not be with a CEM3020 chip like A-123 as those are no longer made unfortunately.

kind regards from Cologne
J.

--- In Doepfer_a100@yahoogroups.com , "john m" <jmaddocks1975@...> wrote:
>
> Exactly, same with the A106.6
> I've also tried the Asolutions MS20 filter and that can't do it either. Such a shame the A123 has gone without a really good 24db replacement.
>
>
>
> --- In Doepfer_a100@yahoogroups.com , "York Luethje" <ybl@> wrote:
> >
> > The A-107 has a 6dB, a 12 dB and a 18 dB HP as well as several combinations
> > with notch filter and such. No 24 dB HP though.
> >
> >
> >
> > _____
> >
> > Von: Doepfer_a100@yahoogroups.com [mailto: Doepfer_a100@yahoogroups.com ] Im
> > Auftrag von jakobsweb
> > Gesendet: Freitag, 17. Juni 2011 07:33
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: 1 Re: Replacement for A123 High Pass Filter
> >
> >
> >
> >
> >
> > I don't know if the A-107 has a 4-pole high pass, the A-106-6 does not (1, 2
> > and 3-pole).
> > I got an A-123 via ebay auction and having all other Doepfer filters, too, I
> > can say there is no replacement fot it in the Doepfer line-up today - it
> > sounds just great.
> > If A-107 or A-106-6 do the trick for you - go for either or both - they are
> > very good in their own way.
> > If you need 4-pole high pass to feed your A-117 then you have to look at
> > other manufacturers like Division 6 (Filtare SEIII) or Cwejman MMF1.
> >
> > regards
> > J.
> >
> > --- In Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100%40yahoogroups.com>
> > , "john m" <jmaddocks1975@> wrote:
> > >
> > > Just noticed its been discountinued, is there a replacement planned
> > > The A117 needs a good high pass to create a decent cymbal/hats, the A124 &
> > A121 simply can't do it. Can any of the other multimode filters manage it
> > >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>