Hi Florian,

of course one could derive the inverter Start/Stop or the separate Start and
Stop pulses with an additional external module (as well as the sub-divided
clocks). But we wanted to put as much meaningful functions as possible into
the module, i.e. without the need of additional trigger modifier/inverter
modules. But as the design is still in an early state (first prototype is
ready) we could replace one of the sockets by a push button that works
similar to the Mungo unit if the majority of the users will vote for this
version. Alternatively we could change one of the output sockets into an
input socket for this function (instead of a button) - or even both: an
input socket and push button. That way an external LARGE button could be
connected to the socket. I'm not sure how important it is to have a large
button like the Mungo unit.

Best wishes
Dieter

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von Florian Anwander
> Gesendet: Freitag, 23. November 2012 13:32
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: 1 Latest info from Dieter about new /
> forthcoming A100 modules!
>
>
> Hello Bakis,
>
> thanks for forwarding
> Hello
>
> Am 23.11.2012 13:07, schrieb Bakis Sirros:
> > Dieter says:
> >
> > "...he available 10 outputs of the A-190-8 are not yet fixed. If
> > the users think other combinations of clocks or start/stop/reset
> > outputs would be better we still can change that because the outputs
> > are generated by the firmware of the processor. After all it's only
> > the printing at the front panel...
> Checking http://www.doepfer.de/a1908.htm I find:
>
>
> "
> ...
> * Start/Stop (normal): turns to high at each Midi Start or Continue
> message, turns to low at each Midi Stop message
> * Start/Stop (inverse): same as above but inverted polarity
> This does not make much sense, as there are easy ways to invert
> the signal.
> ...
> "
>
>
> Instead of this socket "St/St-inverse" I'd really vote for a pushbutton,
> which provides a "Mungo-Sync" like start-in-function.
>
> Florian
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>