http://www.doepfer.de/a1712.htm

 


Bakis


________________________________
From: Peter Sedin < peterhksedin@... >
To: Doepfer_a100@yahoogroups.com
Sent: Thursday, March 14, 2013 1:17 AM
Subject: Re: 1 Re: Some A-100 News

where is these pictures

2013/3/12 thomas_escure < thomas_escure@... >

> **
>
>
> That's very good news !
> Thank you especially for the improved A-130, A-131 and A-135.
> Also the A-171-2 is going to be great, though I find the graphics to be a
> little confusing. Are the "curves" pictures really necessary
> I think there's already a lot of info on little panel space...
> Of course it's a personal preference.
>
> Thomas
>
>
> --- In Doepfer_a100@yahoogroups.com , <yahoo@...> wrote:
> >
> > Dear members,
> >
> > here are some A-100 news:
> >
> > The small version of the multiple A-180 is available in April 2013 (2 HP
> > only, name: A-180-2)
> >
> > The A-130 (linear VCA) is now delivered with a precision VCA circuit
> > (SSM2164) instead of the CA3080. The new A-130 is DC-coupled.
> >
> > The A-131 (exponential VCA) is now delivered also with an improved VCA
> > circuit (high end THAT VCA circuit instead of the CA3080). The new A-131
> is
> > DC-coupled.
> >
> > The A-135 will be available from about May 2013 in a revised version
> with DC
> > coupling of the signals and single outputs, i.e. it can be used also as 4
> > separate linear VCAs with manual gain, CV in with attenuator and signal
> in
> > with attenuator. Because of the DC coupling it can be used also for
> > modulation signal processing (i.e. voltage controlled mixing of control
> > signals).
> >
> > The module A-171-2 (licensed copy of the Serge/CGS VCS) will be available
> > about end of April or early in May 2013.
> >
> > We will show the prototype of the new version of the A-190-5 Polyphonic
> > USB/Midi-to-CV/Gate Interface (with LCD) and the A-190-8 USB/Midi-to-Sync
> > Interface at the Musikmesse in Frankfurt. These modules will be available
> > about summer 2013. We will hopefully also show the "large" version of the
> > trigger sequencer A-157/miniature Schaltwerk (8 rows with 16 steps each).
> > The 8x16 button/LED board is ready but I cannot guarantee that the
> > controller board will be also ready for the Musikmesse.
> >
> > That's it for now ....
> >
> >
> > Best wishes
> > Dieter Doepfer
> >
>
> 
>

--


Mvh

Peter H.K Sedin


[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links



[Non-text portions of this message have been removed]