audio output of the DAW in my audio card, with my PC, this means around 10ms standard delay. cause of the audio latency.
i think the midi notes via the midi-cv interface have better timing. i have not measured it, but it works fine for me for many years.


 
Bakis


________________________________
From: Os < os@... >
To: doepfer_a100 < Doepfer_a100@yahoogroups.com >
Sent: Friday, May 3, 2013 7:00 PM
Subject: Re: 1 A-190-2 as clock


Hi,

it should be mentioned that the tightness of the sync from this method is
at the mercy of the tightness of the MIDI interface. Some MIDI interfaces
have appalling timing.

The tightest sync comes from using the audio output of the DAW directly as
a clock.


cheers,
os.

On 3 May 2013 09:50, Bakis Sirros < synth_freak_2000@... > wrote:

> **
>
>
> my friend Ingo, and then me, are doing this for years. its the tighter
> sync you can get.
>
> yes, set midi clips with 16th notes and use the gate out of any midi-cv
> interface as clock signal to sync your analog sequencer.
>
> if you have a second midi-cv channel, you can do the same technique and
> use the gate (coming from the midi notes from the midi-cv interface) of
> that channel, as a reset signal for your analog modules.
>
> so, you can have a clock that is as low or high rate as you want and a
> reset signal that can occur whenever you want.
>
>
> Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
> 1 group owner
> www. parallel - worlds - music. com
> www. facebook. com/ pages/Parallel-Worlds/192093934136476
> www. myspace. com/ interconnectedmusic
> www. myspace. com/ memorygeist
> www. DiN. org. uk
>
> ________________________________
> From: re_qu < renato.quaroni@... >
> To: Doepfer_a100@yahoogroups.com
> Sent: Friday, May 3, 2013 11:00 AM
> Subject: 1 A-190-2 as clock
>
>
>
>
> Hi
>
> I'm running ableton 8 right now. I understand that it's midi sync has some
> issues in terms of keeping a tight clock.
>
> but i heard rumours that version 9 has improved...
>
> Assuming it hasn't... the clock from the A-190-1, synced by live 8 (or
> 9 ), is not going to be much use to me.
>
> but i had heard of a work around; that essentially setting up a midi clip
> with midi on each beat and then using the CV data to clock is much more
> reliable and keeps tight.
>
> can anyone confirm or deny then i wouldn't need the A-190-1 and could get
> the A-190-2, obviously cheaper and using less HP.
>
> thanks,
> renato
>
> [Non-text portions of this message have been removed]
>
> 
>



--
os@...
http://twitter.com/expertsleepers
http://www.darkroomtheband.net/
http://www.expert-sleepers.co.uk/


[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links



[Non-text portions of this message have been removed]