Hi,

regarding my earlier post about linking (not stacking) two dark energy units using the internal midi thru buss:

I connected my two dark energy's using the supplied jumper lead, making sure that the the lead was plugged into JP5 of the sending unit, and JP6 of the receiving unit. I also ensured that the polarity was correct - ground to ground, and live to live. This did not link the two dark energy synths.

In fact, to link two dark energy's via the midi thru buss, I found I had to connect JP6 of the sending unit to JP6 of the receiving one.  Now when I connect to the midi in socket of the sending unit and play a note on my keyboard, both dark energy's respond at the same time, and with the same note.

Florian,  the issue here is not about including " a full midi compendium" i n the Dark Energy manuals, but instead about including an entry in "section 3.4. Linking / stacking several Dark Energies" to the effect that if you want to link (as opposed to stack) two dark energy's together using the internal midi thru buss, employ a jumper lead between JP6 of each machine.

Deiter,

would it be possible to update the online manuals to reflect this  It might save other users a bit of time and frustration.

Kind regards,

Blair.