Please look at the LED at the bus board that indicates the +5V. This LEDs
has to be "on" with the same brightness as the +/12V LEDs. If the +5V LED is
off or brighter than the +/-12V LEDs the A-100AD5 is faulty (if it's
brighter there are more than +5V, if it's off there is no voltage). To be
100% sure the +5V should be measured. I cannot imagine that both A-100AD5
are defective (but who knows ...)

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von
> dave_doobie@...
> Gesendet: Samstag, 4. Januar 2014 01:10
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: 1 A-190.1 and A-113 problem
>
>
>
>
>
> Hi, thanks Flosynth and Florian for the prompt replies.
>
> I have swopped both my adapters around and discovered that both
> units still do not work so I must have blown a part somewhere
> whether it is the adapter or the modules I do not know yet. I
> may buy another adapter to see if this solves the problem or if
> that fails see if I can have the units repaired.
>
> Thanks
>
> Dave.
>
>
>
>