Argh ... awful typo:
> Do touch P1, P6, and the octave switch while doing these adjustments.
This must read: "Do NOT touch P1, P6,...."
Am 30.10.2014 13:49, schrieb Florian Anwander
fanwander@...
[Doepfer_a100]:
> Hello
>
> Am 30.10.2014 04:54, schrieb
sj230962@...
[Doepfer_a100]:
>> 1. I set 1 to 0= middle, and 1 to 5 =middle to start with. I
>> then checked the range of 1 by turning +/- 2 octaves and tried to
>> calibrate with [P5] - the range potentiometer. Whilst the tracking was
>> a little off +/- 1 octave from 0 (ie 20-40 cents), by +-2 octaves the
>> offset had increased to over 100 cents. How can I adjust [P5] so that
>> the range steps are equal... I didn't seem to find any setting that
>> gave even close to a 1 octave per switch movement.
> You first have to be sure that the general octave tracking is perfect.
> (trimmers P7 and P8). This has to be done using your MIDI/CV-interface
> or your standard CV-keyboard. Do touch P1, P6, and the octave switch
> while doing these adjustments.
>
> Unless this octave tracking works perfect for all four VCOs you should
> not start with the range adjustment of the octave switch.
>
> After you verified that this general octave tracking is good, you can
> adjust the tracking for the switch with P5. This may come close to
> perfect, but not really perfect.
> The reason therefor is: Unfortunately the tracking of the octave switch
> depends not only on P5, but also on the relation between the resistors
> R1(+R1'), R2, R3(+R3'). Their outcoming resistance of their combination
> has to have an exact relation of 1:2:4. It is unimportant whether the
> individual resistors are exactly 150k. But it is very important, that
> these resistors are truely equal within each other.
>
>
>
>> 2. Dumbass question, but should the VCOs be producing C with 1 at 0
>> = fully anticlockwise, or at 5=middle position My 4 VCO's all seem
>> to tune closer to A at 1 = 5 = middle position.
> Simply adjust it with P6
>
> Florian
>
>
> PS:
> > Malaysia isn't a hotbed of analogue synth aficionados.
> I once had the opportunity to buy a Jupiter 8 from Malaysia -
> unfortunately I was not successful. But from the communication with the
> seller it seemed, there are is a vivid music scene.
>
>
>
>
> ------------------------------------
> Posted by: Florian Anwander <
fanwander@...
>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>