hi joe,
when you connect the a154 to the a190,all the
functions/controls of the a154 work(vc/manual running
mode selection,vc/manual step adressing),except the
on-board vc clock.the on-board vc clock still works
but as an individual clock source,that you can use to
clock anything else...........another sequencer,a s/h
module,etc.this is where you use the clock out
jack.the on-board vc clock is internally connected to
the step input of the control section of the a154,but
when you connect anything to the a154 step in,this
connection is broken.so,when you clock the a1564
control section from the midiclock via the a190,you
DON'T have pwm nor vc speed of the clock.that would
be crazy,anyway,wouldn't it be
AM I RIGHT ON ALL THESE,DIETER
bakis.




--- Joe Buechler < buechlerjoe@... > wrote:

> Hmmm, right you are.
>
> So if I understand you correctly, an A190 can be
> connected to both
> step in and reset. In that case, what effect does
> the clock out jack
> have
>
> Do the two CV inputs and pots still work That is,
> do I still have
> variable step length and variable pulse width when
> the A190 clock is
> patched to the Step In jack That's what I want.
>
> Joe
>
> --- In Doepfer_a100@y..., bakis Sirros
> <synth_freak_2000@y...> wrote:
> > nope wrong,joe...
> > the control section of the a155 is disambled when
> you
> > use the a154 to control the a155.also,you HAVE a
> clock
> > input on the a154.just take a better look.
> > bakis.
> >
> >
> >
> > --- Joe Buechler <buechlerjoe@t...> wrote:
> > > > if you use the A190 clock out as the source
> for
> > > the A154 shouldn't
> > > > this give midi sync.
> > >
> > > My understanding of the proposed A154 is that
> the
> > > clock generator has
> > > two CV inputs, to control the clock rate and PW.
> I
> > > didn't see a clock
> > > input socket. So its the same as using an A147
> as a
> > > clock generator
> > > for variable step length, or an A110 for PWM as
> > > well. Neither allow
> > > you to connect the A190 clock out as a source.
> > >
> > > > here is one issue i would like to know further
> > > about. if you are
> > > > using a midi sequencer as you master and you
> use
> > > the A190 to drive
> > > > the A154 or A155, how would it start the A154
> and
> > > or A155's in
> > > sync
> > >
> > > According to the description on the Doepfer
> hidden
> > > page, the control
> > > sockets on the A155 will continue to work as
> usual.
> > > So, you patch the
> > > RESET output of the A190 to the RESET jack on
> the
> > > A155, as currently.
> > >
> > >
> > > Joe
> > >
> > >
> >
> >
> > =====
> > synthfreak(parallel worlds)
> > athens-greece
> > 1 group owner-moderator
> >
> > __________________________________________________
> > Do you Yahoo!
> > U2 on LAUNCH - Exclusive greatest hits videos
> > http://launch.yahoo.com/u2
>
>

=====
synthfreak(parallel worlds)
athens-greece
1 group owner-moderator

__________________________________________________
Do you Yahoo!
U2 on LAUNCH - Exclusive greatest hits videos
http://launch.yahoo.com/u2