> Hi there
>
> From the technical infromation of the dark energy it says:
>
>
>
> "To connect two Dark Energy's via Midi JP5 of the first unit has to be wired to JP6 of the second unit. Asuitable link
> cable is available soon. Pay attention to the correct polarity of the cables (GND GND andhot pin hot pin). If the
> polarity is wrong nothing can be damaged but the link function will not work. Thelink cable is fed trough the holes in
> the side plates of the case. If a wooden side plate is used between thetwo units the side plate has to be drilled in addition"
>
>
> I was wondering, what this suitable cable is It's just a cable that connects to pins I'm guessing these are quite
> generic but do they have a name
>
>
> thanks
The cables just connect two pins are included with each Dark Energy.
But an external Midi thru box with 2 outputs does the same job.
Best wishes
Dieter Doepfer
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
Doepfer_a100-digest@yahoogroups.com
Doepfer_a100-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Doepfer_a100-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/