On Fri, Mar 6, 2015 at 12:32 AM, achtung_999 < heinrich.himmelwasser@... > wrote:

Here's the same setup at 1kHz:
https://dl.dropboxusercontent.com/u/3215564/1712-2.flac

Still no processing!

On Fri, Mar 6, 2015 at 12:19 AM, yahoo ctujoao@... 1 < Doepfer_a100@yahoogroups.com > wrote:

 

Thanks for the try out and for the file.  

My question was more what happens when you go over 250Hz (250 is the roughly the limit for the maths). 

If you increase the frequency of the sine towards 1k and above, does it turn into a triangular waveform. 

I’ll record an example tomorrow with a math to demonstrate. 

On 06 Mar 2015, at 00:00, achtung_999 heinrich.himmelwasser@... 1 < Doepfer_a100@yahoogroups.com > wrote:

https://dl.dropboxusercontent.com/u/3215564/a145%3A145%3E171-2.flac

Here's a link to a Flac file I recorded. It's the sine output from an a145 lfo around 250Hz.
First 10 seconds is just that. After the short break the A145 is processed by the A171-2.
All knobs set to zero, in exponential setting and cycle is switched off (of course!).
I don't see or hear any processing going on...

all the best,

Ernst

On Thu, Mar 5, 2015 at 12:55 PM, achtung_999   < heinrich.himmelwasser@... >   wrote:

I will test it later today. I have an a171-2 and a scope here..

Ernst

On Thu, Mar 5, 2015 at 12:16 PM, yahoo   ctujoao@...   [Doepfer_a100]   < Doepfer_a100@yahoogroups.com >   wrote:

 

Thanks for the link. 

Unfortunately, this topic is not really addressed. 

They mention the triangular LFO shape but that’s it.

There’s no mention of signal modification in “kind of by pass” mode. 

On 05 Mar 2015, at 00:16, achtung_999   heinrich.himmelwasser@...   [Doepfer_a100] < Doepfer_a100@yahoogroups.com > wrote:

 

Dig into this topic at Muffwiggler, it will most likely answer all your questions:

https://www.muffwiggler.com/forum/viewtopic.php t=73618&start=all&postdays=0&postorder=asc

Ernst

On Thu, Mar 5, 2015 at 12:10 AM, achtung_999   < heinrich.himmelwasser@... >   wrote:

You mean the A171-2 I presume  

Ernst

On Wed, Mar 4, 2015 at 11:56 PM, yahoo   ctujoao@...   [Doepfer_a100]   < Doepfer_a100@yahoogroups.com >   wrote:

Hello,

I’ve tested a make noise math and any waveform above 200/300Hz get transformed to something more “triangular” even with both slew parameters set to 0 (very obvious with a sine).
I’ve got a A-170 and it’s definitely not the case: what goes in, come out unmodified if the slew is at 0. That’s what I like about it.
So does the 170-2 have the same behaviour as the maths (modifying the incoming signal)
Is it the same type of circuitry that will lead to this behaviour

Thanks.






------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
      http://groups.yahoo.com/group/Doepfer_a100/

<*> Your email settings:
      Individual Email | Traditional

<*> To change settings online go to:
      http://groups.yahoo.com/group/Doepfer_a100/join
      (Yahoo! ID required)

<*> To change settings via email:
      Doepfer_a100-digest@yahoogroups.com
      Doepfer_a100-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
      Doepfer_a100-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
      https://info.yahoo.com/legal/us/yahoo/utos/terms/