Il giorno 22 set 2017, alle ore 14:01, Malte Stamm-Gadow m.stamm-gadow@... 1 < Doepfer_a100@yahoogroups.com > ha scritto:

Hello Dieter,

I think, there are many musicians like me out there, who will like a modul to convert Midi-CCs into CV and who are no diy-guys. 

Greetings,

Malte

Malte Stamm-Gadow

Diekmissen 5

24159 Kiel

Am 22.09.2017 um 13:53 schrieb   yahoo@...   [Doepfer_a100] < Doepfer_a100@yahoogroups.com >:

We have such a device available as a DIY product (MTV16) but not as module.
It's easy for a DIYer to mount the MTV16 board behind a front panel with 16
sockets and wire the 16 sockets to the MTV16. And the MTV16 could be powered
by the +12V of the A-100 bus. I'm not sure if there are sufficient inquiries
to justify the "conversion" of the MTV16 into a module.

Best wishes
Dieter Doepfer

-----Ursprüngliche Nachricht-----

Von:   Doepfer_a100@yahoogroups.com   [ mailto:Doepfer_a100@yahoogroups.com ]

Gesendet: Freitag, 22. September 2017 12:41

An:   Doepfer_a100@yahoogroups.com

Betreff: 1 Suggestion: Simple+cheap multiple MIDI CC to CV

converter

Hello.

I have a module suggestion: a simple cheap module that converts

multiple MIDI control change messages into multiple control voltages.

AFAIK, the simple and cheap MIDI-CV converters (like A-190-4) don't

support many CCs, only velocity + one controller. Only expensive

converters support multiple CCs.

I don't understand electronics, but I guess it wouldn't cost too much

to just skip note ons and concentrate on a set of CCs and output them

as voltages. To keep costs down, the MIDI channel and controller

numbers could be hard-coded. This way no user interface would be

needed.

Or, if it doesn't cost much, maybe a switch for MIDI channel can be

added. But the controllers can be any predefined set, because

computers and their software can easily accommodate to that.

Maybe it would be nice to support both 7 and 14 bit controllers, but

if not, 14 bits would be better, for accuracy of the values rather

than speed of change.

If anybody, Doepfer would be the company to achieve this, right :)

- Ville Oikarinen

------------------------------------

Posted by: Ville Oikarinen < ville@... >

------------------------------------

------------------------------------

Yahoo Groups Links

------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Doepfer_a100/

<*> Your email settings:
   Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Doepfer_a100/join
   (Yahoo! ID required)

<*> To change settings via email:
    Doepfer_a100-digest@yahoogroups.com  
    Doepfer_a100-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    Doepfer_a100-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/