previous | index | next |
<< | topic list |
> On 23 Oct 2017, at 13:48, yahoo@... 1 < Doepfer_a100@yahoogroups.com > wrote:
>
> I'm sorry - no. The A-190-5 is polyphonic USB/Midi-to-CV/Gate interface to
> convert note on/off messages on one or more Midi channels into CV and Gate
> signals. For the conversion of Midi clock I'd recommend the A-190-8 as it
> offers the most possibilities. Maybe one of the gate outputs of the A-190-5
> may work as clock outputs in a future firmware version. But I do not want to
> promise anything before Christian confirms that this a potential option.
>
> Best wishes
> Dieter Doepfer
>
>
>
>> -----Ursprüngliche Nachricht-----
>> Von: Doepfer_a100@yahoogroups.com [mailto: Doepfer_a100@yahoogroups.com ]
>> Gesendet: Montag, 23. Oktober 2017 13:29
>> An: Doepfer_a100@yahoogroups.com
>> Betreff: Re: AW: 1 A-190-5 question
>>
>>
>> Thanks for responding so quickly Dieter, one final question: Is
>> there any way to transmit midi clock via the 190-5
>>
>> Neil
>>
>> Sent from my iPhone
>>
>>> On 23 Oct 2017, at 12:24, yahoo@... 1
>> < Doepfer_a100@yahoogroups.com > wrote:
>>>
>>> Hello Neil,
>>>
>>> the A-190-5 will not have a higher resolution. But I'm not sure if it's
>>> indeed a problem of the CV resolution. 12 bit should be more than enough
>>> because the midi data for monophonic after touch are 7 bit
>> only. I suppose
>>> that it's a problem with the data rate (i.e. how fast the data
>> is sent). The
>>> A-190-4 does not have a "software slew limiter" which smoothes
>> the stepped
>>> data.
>>>
>>> Best wishes
>>> Dieter Doepfer
>>>
>>>> -----Ursprüngliche Nachricht-----
>>>> Von: Doepfer_a100@yahoogroups.com [mailto: Doepfer_a100@yahoogroups.com ]
>>>> Gesendet: Montag, 23. Oktober 2017 13:11
>>>> An: Doepfer_a100@yahoogroups.com
>>>> Betreff: 1 A-190-5 question
>>>>
>>>>
>>>> Hi Dieter,
>>>>
>>>> Can I ask if the A-190-5 midi to cv resolution will be higher
>>>> than the 190-4 I only ask as I do notice that this ‘stepping’ is
>>>> noticeable when controlled from software or keyboards with say
>>>> aftertouch.
>>>>
>>>> Regards,
>>>>
>>>> Neil
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> ------------------------------------
>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo Groups Links
>>>
>>>
>>>
>>
>>
>> ------------------------------------
>> Posted by: Neil Kagan < nkagan@... >
>> ------------------------------------
>>
>>
>> ------------------------------------
>>
>> Yahoo Groups Links
>>
>>
>>
>
>
>
> ------------------------------------
>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>