Thanks a lot Dieter
I will try the way you say
Best regards,
dxx

> Il giorno 18 mag 2018, alle ore 11:04, yahoo@... 1 < Doepfer_a100@yahoogroups.com > ha scritto:
>
> Hello,
>
> in principle it should work. As you suppose the gate is simply derived from
> the envelope signal by means of a comparator with adjustable threshold. I'd
> recommend to set the threshold fully clockwise (max. threshold value, about
> +9V) and then reduce the gain until the gate output behaves as desired.
>
> Best wishes
> Dieter Doepfer
>
>
>> -----Ursprüngliche Nachricht-----
>> Von: Doepfer_a100@yahoogroups.com [mailto: Doepfer_a100@yahoogroups.com ]
>> Gesendet: Freitag, 18. Mai 2018 07:41
>> An: Doepfer_a100@yahoogroups.com
>> Betreff: 1 A simple patch with the A-119
>> Ext.Input/Env.Follower
>>
>>
>> Hello everybody,
>>
>> Hope someone can help me somehow
>>
>> I have a simple patch involving this module:
>> A mult signal from electric rhythmic guitar (muted peaks:
>> extremely transient short envelopes) feeds the module to create
>> gates which in turn are used to trigger MI Rings. The problem -
>> it seems to me - is that a further gate is not created until the
>> previous guitar peak is not completely “silenced”… : of course,
>> the module cannot generate a new gate until the previous is HIGH…
>>
>> I had tried to manage the thing by the means of the threshold
>> knob but it doesn’t solve (and this is strange)… Anybody any hint please
>>
>> I do believe the module includes a comparator at the threshold
>> stage: should I try using another comparator in the patch
>>
>> Best regards, Diego
>>
>> ------------------------------------
>> Posted by: Diego Ragnini < diegora@... >
>> ------------------------------------
>>
>>
>> ------------------------------------
>>
>> Yahoo Groups Links
>>
>>
>>
>
>
>
> ------------------------------------
>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>