test

Hi thanks everybody for replying

The situation was vague indeed, sorry, though the patch is very basic

The case is just 1 row (LC3)

As you can see by the colours on the following screenshot, the multed audio 1 signal (red cable) is slightly affected by the audio 2 signal (blue cable), as we turn CW the A-138s channel volume knob.

Nothing else is patched/ engaged.

I unfortunately have no means nor expertise for measuring anything.

ASAP I will first try installing the multiple on another case.

Best, Diego

Il giorno 12 giu 2018, alle ore 10:25, John Hollis john@hollis.co.uk 1 < Doepfer_a100@yahoogroups.com > ha scritto:

Hi Diego,

It does sound like there might be a short between the adjacent modules. Can you check for that

Thanks
John

> On 12 Jun 2018, at 08:57, yahoo@doepfer.de [Doepfer_a100] < Doepfer_a100@yahoogroups.com > wrote:
>
> Hello,
>
> the A-138s is a very simple module (just a standard mixer circuit with
> operational amplifiers) and I have no idea how the signal could crosstalk to
> any other module.
>
> Best wishes
> Dieter Doepfer
>
> > -----Ursprungliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com [ mailto:Doepfer_a100@yahoogroups.com ]
> > Gesendet: Montag, 11. Juni 2018 15:09
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: 1 Interferences from A-138s into LC6
> >
> >
> > Hello, I have a WMD buffered multiple which suffers from A-138s
> > mixer interferences, both powered by an LC6 Doepfer case. Is the
> > WMD faulty or its cable A-138s output can be heard on the WMD,
> > unless knob's fully CCW. I also see that the multed signal is
> > louder that the original one. Any hint is welcome.
> >
> > Best regards,
> > Diego
>
>
>

previous	index	next
<<	topic list	>>

27902 Re: 1 Interferences from A-138s into LC6