Hello,

a pitch change in the 1-2 cent range is normal and may be caused e.g. by
fluctuations of the supply voltage or stray pick-up from the CV line of the
bus (if not used I'd recommend to remove the bus jumper JP4).

I suppose that the module has to be re-adjusted unless there is another
fault (like a defective trimming potentiometer, e.g. P8).

First of all the 1V/octave of the CV input has to be adjusted with P8. For
this a precise external CV source (e.g. midi interface) has to be used which
generates exact 1.00V intervals.
After that range of the octave switch has to be adjusted with P13.

If you are not able to do the readjustment please send it to the dealer
where you purchased the module.

Best wishes
Dieter Doepfer

> Thank you Dieter for your quick answer but I think that I was not
> so precise in my previous posts.
> I left it today for 30 minutes to warm up, the pitch is jumpin
> around the tuned frequency 1-2 cents.
> The main problem is still the octave switch, which still is not
> doubling the frequency or half double it.
> Lets say I tune in C@130Hz,
> I turn the knob one octave up, the pitch is around C#@280Hz
> I turn the knob one octave down. from the initial position the
> pitch is around B@61Hz
> Also I run a sequence with Dark time, it has similar results, not
> exactly doubling the pitch with octave range
> switch at dark time at 1V
> Sorry for the misconception...
>
>
>
> Best regrads
>
>
> Miltos
>
>
>
>
>
>
>
>
>
>
>
>