hi joe,
i don't use the a160 clock divider because i have
already divided the clock using the divisor of the
a190.(but i'm going to put the divisor of the a190
back into smaller values because the clock output of
the a190 now seems rather slow...anyway you can divide
the clock without using the a160.
i hope this will be of some help...
synthfreak
p.s.:or,you can always buy another a160...
or...why can't you use the a160 for dividing the a190
clock and switching between the a155's rows at the
same time

--- buechlerjoe < buechlerjoe@... > wrote:

> Hi bakis
>
> I assume you step down the A190's clock output with
> an A160 clock
> divider I like to keep my A160 available for
> switching between the
> A155's rows. Is there another way
>
> Joe
>
> --- In Doepfer_a100@y..., bakis Sirros
> <synth_freak_2000@y...> wrote:
> > hi joe,
> > about your sync problem...i use the clock output
> of
> > the a190 to sync my a155.and the "problem" that i
> have
> > is that the a155 allways starts from the second
> > step.(of course i have the reset out of the a190
> > connected to the input of the a155...).i sync my
> a155
> > to my old atari st.but it's not a real problem as
> it
> > allways starts from the second step,everything
> else is
> > o.k..it might be that i have my a190 connected to
> midi
> > with my atari after a very long midichain.
> > why don't you use the clock out of the a190
> > bakis.
> >
> > --- buechlerjoe <buechlerjoe@t...> wrote:
> > > I tried out the Shepard generator when I first
> got
> > > the A191, but I'm
> > > sorry not to have any creative thoughts
> regarding it
> > > - I haven't
> > > switched the A191 to Shepard mode since then.
> The
> > > Midi/CV sockets and
> > > the Midi-synced LFOs are far too useful to me. I
> > > consider the A190/191
> > > to be a single integrated Midi interface, and I
> > > can't imagine trying
> > > to get by with just the A190 alone.
> > >
> > > A thought occurred to me about my sync problem.
> My
> > > previous master
> > > clock source might have been confusing the A191
> in
> > > some mysterious
> > > way, sometimes leaving it in phase, sometimes
> out of
> > > phase. Perhaps it
> > > was in the "out of phase" state when I switched
> over
> > > to the Regelwerk.
> > > I'm going to temporarily re-connect the original
> > > clock source, and try
> > > to get the A191 back to the "in phase" state. If
> > > that doesn't work,
> > > I'll directly email Doepfer about the problem.
> > >
> > > Joe
> > >
> > > --- In Doepfer_a100@y..., bakis Sirros
> > > <synth_freak_2000@y...> wrote:
> > > > hi and wellcome to the list!
> > > > i wish i could help but,i don't have an
> a191...
> > > > by the way,as you have this module,tell us
> ,have
> > > you
> > > > used the shepard generator any creative
> > > thoughts
> > > > synthfreak
> > >
> > >
> >
> >
> >
> > =====
> > synthfreak(parallel worlds)
> > athens-greece
> > 1 group owner-moderator
> >
> > __________________________________________________
> > Do You Yahoo!
> > Send your FREE holiday greetings online!
> > http://greetings.yahoo.com
>
>

=====
synthfreak(parallel worlds)
athens-greece
1 group owner-moderator

__________________________________________________
Do You Yahoo!
Send your FREE holiday greetings online!
http://greetings.yahoo.com