Hi Dieter and list,

Really there is no hearing difference at audio rates but when using the
VCOs as modulation you`ll notice the difference.
BTW, one of my favorites VCOs are the ARP ones, they are also ramp
instead saw and they are mislabelled in front panel ;)
I was thinking you can`t get a ramp using an inverter from a saw wave..
you`ll ned to reverse the wave, not invert it...Right
Best regards,

Josue Arias.

----- Mensaje Original -----
De: "Dieter Doepfer" < hardware@... >
Fecha: Lunes, Diciembre 1, 2003 10:14 am
Asunto: AW: 1 More comments on Doepfer VCOs 110 vs 111

> > -----Ursprüngliche Nachricht-----
> > Von: ALMAGATA@... [mailto: josue@... ]
> > Gesendet: Samstag, 29. November 2003 12:01
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: 1 More comments on Doepfer VCOs 110 vs 111
> >
> >
> > Hi People,
> >
> > I was testing both VCOs on scope and I noticed the SAW from 110
> and 111
> > are reversed: the 111 have a ramp instead of a saw wave so the
> printed> graphic of the front panel is not corresponding with the
> wave out.
> > Anyone noticed this "fault"
>
> For the human ear there is no difference between rising and
> falling saw.
> Simply try to insert a voltage inverter into an audio signal. You
> will hear
> no difference. But you are right, the labelling is wrong (but
> after more
> than 5 years you are the first customer who noticed that "fault".
>
> Best wishes
> Dieter Doepfer
>
>
>
> ------------------------ Yahoo! Groups Sponsor --------------------
> -~-->
> Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
> Printer at MyInks.com. Free s/h on orders $50 or more to the US &
> Canada. http://www.c1tracking.com/l.asp cid=5511
> http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/QnLolB/TM
> -------------------------------------------------------------------
> --~->
>
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>