Hi Joe
> I'm almost embarrassed to admit that I've used an A175 as a 3-way
> multiple when the A180s were tied up.
My standard:
A-160 (not clocked) -> I use a logical high output as constant voltage
source. The voltage is fed to the CV2 of a VCO. Now I am able to tune the
VCO over the complete frequency range.
Btw, I want to add switch and a 100kOhm Resistor to the VCO. The resistor
will be paralleled to R5 (1MOhm); the switch will select between the 1MOhm
and the 100kOhm, which results in a wide tuning range for the "fine"-poti.
Florian
--
Florian Anwander |ConSol* HP-Support
Tel. +49.89.45841-133 |Consulting&Solutions Software GmbH
Fax +49.89.45841-139 |Franziskanerstr. 38, D-81669 München
email:
florian.anwander@...
|
http://www.consol.de