Thanks a lot Syntegrator !

I never read this mention ! So I've applied the 2 sysex for 2.8: the sound is back again !! :)


It seems that I have to acces Global Parameters A first, then the B group. If I go directly to B group, all leds are flashing and running.

This little appart, everything seems to work.

The midi clock is supported again too !! :)
So nice

Thanks a lot guys,
Best regards,
Fred

--- In kiwitechnics@yahoogroups.com , "syntegrator" <tony@...> wrote:
>
>
>
> Fred, this may be an incredibly obvious question to ask, but you remembered to do a 'WRITE' + 'WRITE' power-up after each software update in your process, right?
>
> I'm just making sure this is the case before anyone ships a CPU - Forgetting to 'WRITE' + 'WRITE' has caught me out once or twice after software updates on my unit, and the symptoms are exactly the same as what you are reporting... Namely, no sound.
>
> Syntegrator
>
> --- In kiwitechnics@yahoogroups.com , "poiskaill" <poiskaill@> wrote:
> >
> > Thanks Murray,
> >
> > I'll send you the CPU on Monday.
> >
> >
> >
> >
> > --- In kiwitechnics@yahoogroups.com , Kiwitechnics <yahoogroups@> wrote:
> > >
> > > You can return the cpu to me so I can test it. If it does turn out to be
> > > faulty I will replace it for the cost of postage only (NZ$16).
> > >
> > > Regards
> > > Murray
> > >
> > > On 11/12/2011 11:36 a.m., poiskaill wrote:
> > > >
> > > > I've changed the midi interface:
> > > > I've been able to downgrade both files to 2.7: still no sound.
> > > > I've updated the synth with the two 2.8 sysex: no sound again.
> > > > I noticed that 'global parameters A, 1 to 16' work normally, but
> > > > 'global parameters B' don't work.
> > > > If I ask for GP B 1 > some leds are flashing, 1 to 6, etc ... If I
> > > > press one it lights off, the sens cursor is not active.
> > > >
> > > > I can hear the Chorus, I also can change his rate whith the sens cursor.
> > > >
> > > > What can I do 1 2
> > > >
> > > > thanks
> > > > Fred
> > > >
> > > > --- In kiwitechnics@yahoogroups.com
> > > > <mailto:kiwitechnics%40yahoogroups.com>, "poiskaill" <poiskaill@>
> > > > wrote:
> > > > >
> > > > > Florian,
> > > > >
> > > > > As I said, the synth was working just a few minutes ago with 2.7 inside.
> > > > >
> > > > > It's a software pb for sure.
> > > > >
> > > > > Fred
> > > > >
> > > > > --- In kiwitechnics@yahoogroups.com
> > > > <mailto:kiwitechnics%40yahoogroups.com>, Florian Anwander <fanwander@>
> > > > wrote:
> > > > > >
> > > > > > Florian
> > > > > >
> > > > > > Backgrading within all 2.x versions does work without any problem. I
> > > > > > have to admit, to me it sounds much more like a hardware fault than a
> > > > > > problem of Murrays software.
> > > > > >
> > > > > > I installed upgrades in seven or eight JX3Ps for different people,
> > > > and
> > > > > > all of them now are running on 2.7 or 2.8 without any problem.
> > > > > >
> > > > > > I can't judge your situation from here, but I think it would be very
> > > > > > helpful if you would let a skilled technician have a look on your
> > > > synth.
> > > > > >
> > > > > > Florian
> > > > > >
> > > > > > poiskaill wrote:
> > > > > > > Hi Florian,
> > > > > > >
> > > > > > > I've tried to update again but the 3p doesn't react.
> > > > > > > Also with the 2.7. I can't get back !
> > > > > > >
> > > > > > > I don't have to test the original cpu cause I've played the
> > > > synth just before the update to 2.8.
> > > > > > >
> > > > > > > Murray how can I reset everything 1 2
> > > > > > >
> > > > > > > This upgrade really doesn't work for me :(
> > > > > > >
> > > > > > > I think about coming back to the original one.
> > > > > >
> > > > >
> > > >
> > > >
> > >
> >
>