Hello Natalia,

Unlike the MS-10 the MonoPoly uses V/Oct and positive Gate.

I could imagine, that the gate voltage is too low.

@Valerio: What happens, if you do the followgin:
* Connect only the CV but don't plug the Gate cable into the Monopoly. *
Then press and hold a key on the keyboard.
* Then press play in Logic.
Does the pitch now follow the pitches of the sequence in Logic

Florian

Natalia Rakowski wrote:

>
>
> Hi Valerio -
>
> I have it working in Ableton Live with an MS-10, so I know it definitely
> works with Korg gear that uses CV. Unfortunately, I just purchased my
> Mono/Poly and sent it off for my tech to check out so I have not tried
> it with the Mono/Poly yet.
>
> However, just a few ideas:
>
> With my MS-10 I had to invert the gate to have it trigger properly. On
> the Voice Controller plugin I have it set like this:
>
> Gate Open: 0
> Trig On: 1
> Vel Max: 1
> Gate Closed: 1
> Trig Off: 0
> Vel Min: -1
>
> What happens if you try calibrating using the "Calibrate Hz/V" button
>
> -- Natalia
>
> ------------------------------------------------------------------------
> *From:* ugh_it < valerio.saggini@... >
> *To:* korg_mono-poly@yahoogroups.com
> *Sent:* Thursday, May 17, 2012 12:26 PM
> *Subject:* [korg_mono-poly] Expert Sleepers Silent Way and Mono/Poly
>
> Hello,
>
> I'm Valerio, from Italy.
>
> I've tried to set up the demo version of Silent Way SW Voice
> Controller 1.6.0 in Logic 9.1.7 to control my M/P via a Motu 828mk3
> Hybrid but it doesn't work.
>
> Has anybody successfully tried this thing
>
> Here is what I've done (following instruction shwon in Expert
> Sleepers YT video at
> http://www.youtube.com/watch feature=player_embedded&v=ZUke1CDYY8E:
>
> *Physical Connections*
>
> - Motu Out 7 goes into MP CV In via the tip plug (ring floating) of
> a Hosa TRS/2 x TS cable.
> - Motu Out 8 goes into MP Trig In via the tip plug (ring floating)
> of a Hosa TRS/2 x TS cable.
> - MP Output goes into Motu In 5.
>
> *Logic Setup*
>
> I created 2 tracks:
>
> - 1 audio track fed by input 7 (that is Motu In 5)
> - 1 SW Instrument track which takes as input Silent Way SW Voice
> Controller and output to 7-8 channels.
>
> Then I've sidechained input 7 to Silent Way.
>
> In the mixer I've created 2 auxes Silent Way track which output to
> 5-6 channels (Aux 1) and 7-8 (Aux 2).
>
> That's it.
>
> In the meter of Silent Way channel I can see a continous signal in
> channel 7 and when I hit a key in my master keyboard I see the
> signal in channel 8 but nothing happens.
>
> Any idea
>
> Thanks
>
> Valerio
>
>
>
>
>