On Thu, Mar 28, 2013 at 8:20 PM, dir_marillion < dir_marillion@... > wrote:

 

Hi,
We have the following results:

Turning on the instrument. All knobs working great.

When I press any key on the keyboard, on any octave and any pitch, with filter or not (cutoff 100% - resonance 0%), with LFO(MG) or not, I listen this note which comes together with a strange noise and it ends with a pacman like sound.

It has nothing to do with noise knob, which is also working, but it is different than the "noise" I describe. It seems that this "noise" is a not a ground like sound. Whatever is the waveform we select on any oscillator, it seems like a sound that passes through the VCOs (all VCOs), so Monopoly exports this strange "noise" sound on any key press.

Technician has already replaced the following parts:

0. all capacitors on boards (including the power supply capacitors)

1. ssm2044 with a new one (which is tested and working on a polysix)
2. tl072cn (put on socket)
3. hd14051bp (DAC)
4. all the chips on sockets (on cpu board) with exact the same chips versions
5. cpu D8049C-217 (which is tested and working on a polysix)

has already checked the VCO chips and they have the appropriate temperature while Mono/Poly is working.

has already checked all board connectors/cables and they are ok

capacitors have been checked and they are all with correct polarity installed

volts on cpu board are just

no cut lines can be seen as all circuits are in very good condition

when portamento is at full, it seems that the "noise" comes smoother with lower volume.

Thank you for helping me.

--- In korg_mono-poly@yahoogroups.com , "dir_marillion" <dir_marillion@...> wrote:
>
> Hi Laszlo,
> Thank you for your message.
>
> I have already forwarded your steps to the Technician. He will probably check them during next week and I will let you know the results of course.
>

> --- In korg_mono-poly@yahoogroups.com , Laszlo Kovari <friendomatic@> wrote:
> >
> > 1. Set osc volumes to min and check the noise issue with open filter and
> > vca. This way you can detect whether problem relates to vcf+vca or
> > oscillators.
> > 2. Check board to board connectors. A loose connector situation can cause
> > instability.
> > 3. Probably the DAC makes the noise, "pacman" like sound -> instabile CV to
> > oscillators. Check if all 4 oscillators involved in the issue or just one.
> > 4. Maybe a bad cap-polarity Double check your recapping work.
> > 5. Recapping makes sense in my opinion. I recapped the power supply and the
> > vcf+vca board in my MP. Electrolytic capacitors have a 2000-3000 hour
> > lifetime before they go out of specification. Out of spec means they do
> > their jobs less and less effectively, sound becomes degraded and noisy over
> > years.
> >
> > Laszlo
> >
>