On Thu, Oct 18, 2012 at 6:06 PM, Martin Ator
<
cyllall@...
>
wrote:
If the volume control is set at maximum can you use VCA settings in the programming section to make the sound quieter
Sent:
Thursday, 18 October 2012, 21:50
Subject:
Re: [oberheim] trying to diagnose generall weakness of my matrix 12
Changing velocity sensitiy didn't help..
On Thu, Oct 18, 2012 at 5:03 PM, Martin Ator
<
cyllall@...
>
wrote:
Check if you get any changes by editing velocity sensitivity etc pages 68, 89, 70 of the user manual, also check VCA settings page 115
Have you got it set up to control volume using pedals instead
Somethings not quite right. It shouldn't be that quiet. I don't know if the volume is microprocessor controlled
Maybe some parts of the volume control circuitry have gone awry. Is it the same for all patches I take it
Has this been modded for individual output jacks, if so are these working OK
Try not to do any hot swapping. Power down before plugging any jacks in/out.
Your Juno works fine with your audio interface
No -10db, 0db, +4dB switches switched to the wrong thin anywhere
The answer could be something simple and because it's passing audio it might not be a very big problem to fix.
What's the history of this Matrix 12, was it working fine at one stage
Martin
From:
Loveslap! Recordings <
loveslap@...
>
To:
oberheim@yahoogroups.com
Sent:
Thursday, 18 October 2012, 19:48
Subject:
Re: [oberheim] trying to diagnose generall weakness of my matrix 12
I turned the juno way down to match the maximum volume of the matrix.
On Thu, Oct 18, 2012 at 1:58 PM, Peter Mörck
<
peter@...
>
wrote:
Perhaps turning the volume up helps
:P
I could barely even see the waveforms in Audacity at normal zoom level.
Is your mixer/soundcard healthy
Those waveforms look terrible, both the Juno and the Matrix ones.
Like synced or something...
Turn the volume up and try bypassing any mixers if there was any.
This recording just seemed strange.
BR,
Peter
----- Original Message -----
Sent:
Thursday, October 18, 2012 2:54 AM
Subject:
Re: [oberheim] trying to diagnose generall weakness of my matrix 12
sanity check:
http://www.sendspace.com/file/f8slzb
right channel is Juno106
left channel is matrix 12
both are single saw waves (no sub osc on the juno, only one osc used on the matrix)
filter is wide open
resonance is at 0
all modulation is off
On Wed, Oct 17, 2012 at 11:16 AM, Loveslap! Recordings
<
loveslap@...
>
wrote:
i will post an audio example for sanity check purposes.
On Wed, Oct 17, 2012 at 10:55 AM, Paul Cunningham
<
paul@...
>
wrote:
I find that Oberheims (from the Matrix era) are awesome for complex textures and realtime modulation, and while they do (and should) have a respectable low-end, they are not heavy-handed. You can still get some big lows though using the triangle waveform and a bit of resonance like you said. Most of the sound is in those CEM chips and each Oberheim I've heard sounds unique. I have four Matrix-1000s and each one is a little bit different, but they sound amazing all together.
They are unlike other hybrid synths in the sense that there is a little of "play" in the settings and that this, when combined with the modulation matrix, add up to something more like a single board modular synthesizer.
I have no idea about the factory programs for the Matrix-12, but a pair of Matrix-1000s playing the same patch, one panned left and the other right, sounds tremendous! It's a subtle thing, but I expect that you can get some amazing imagery using the same approach. -pc
On Oct 16, 2012, at 10:58 AM, oberhomie wrote:
Hello
I have a Matrix 12 (Voice 1.4) (Main Software 1.1)
I like it but when I listen to online samples they sound much better..
Mine seems to lack "balls".. I have no trouble with any tuning.
But my low end doesn't seem to be there and many of the factory presets don't really impress.
Once thing I've noticed is that when I adjust the VCF resonance, there is a HUGE difference between 62, and 63.. in fact resonance=63 is the only time the synth grows a pair... 0-62 is wimpy, 63 is burly.
Is this normal
I really want to get this thing sounding good!!!
--
Loveslap Recordings
http://www.loveslap.com
Galaxy Group - Ease Back (w/ BSC and 1200 Warriors Remixes)
http://www.traxsource.com/index.php
act=show&fc=tpage&cr=titles&cv=33653&alias=downloads
--
Loveslap Recordings
http://www.loveslap.com
Galaxy Group - Ease Back (w/ BSC and 1200 Warriors Remixes)
http://www.traxsource.com/index.php
act=show&fc=tpage&cr=titles&cv=33653&alias=downloads
--
Loveslap Recordings
http://www.loveslap.com
Galaxy Group - Ease Back (w/ BSC and 1200 Warriors Remixes)
http://www.traxsource.com/index.php
act=show&fc=tpage&cr=titles&cv=33653&alias=downloads
--
Loveslap Recordings
http://www.loveslap.com
Galaxy Group - Ease Back (w/ BSC and 1200 Warriors Remixes)
http://www.traxsource.com/index.php
act=show&fc=tpage&cr=titles&cv=33653&alias=downloads