Hi Andre,

Thank you very much for the manual.

Actually, it is about the Xpander and the Matrix-12, I think the Matrix-6 came after the Matrix-12.

And Craig Anderton was one of my gurus... I strill have lots of
his writings in Guitar Player and Keyboard Magazine. I may have a few of his cassettes ...

--- In oberheim@yahoogroups.com , "Joigaloid" <andre_sand@...> wrote:
>
>
>
>
> Hi jleroux2010:
>
> It took me a while, but I finally was able to scan and upload the Matrix 12 Preliminary Operation Manual. It is under the Matrix-12 Docs folder and has filename "Matrix12PrelimOpGuide.7z". In spite of the funny filename, it should unzip fine into a pdf file.
>
> As you can see from the first couple of pages, this manual was meant to be used with a Matrix-6 manualas a reference. It highlights the differences between the -12 and the -6 and the matrix-12 unique operations.
>
> I looked briefly at your uploaded patch sheet. Since the individual voice architecture is the same between the M6 and M12, I can think of any reason offhand you can't use the sheet for M12 single patches.
>
> ... you're sending me back. I was a subscriber to Electronic Musicion back in 1988, read a lot of Craig Anderton's stuff. I wonder if I still have is music cassette in the closet somewhere...
>
>
> Anyway, hope this helps!
>
> Regards,
>
> - as
>
> --- In oberheim@yahoogroups.com , "jleroux2010" <jleroux2010@> wrote:
> >
> > Hi Joigaloid
> >
> > Thank you very much for your feedback.
> >
> > If the illustrations in this manual are the same as in the full Matrix-12 manual, then this manual is useless for me.
> >
> > I am doing a comparison between the Xpander and the Matrix-12 owner's manuals for the Single Patch Options (VCOs, VCF, VCA, ENVs, LFOs, TRACKs, RAMPs).
> >
> > Is it true that most of the Pages 2 options are mostly ON/OFF parameters
> >
> > I will upload the Xpander Patch Sheet that was published by Craig Anderton in Electronic Musician - January 1988 into the Matrix-12 docs.
> >
> > Thanks.
> >
> >
> > --- In oberheim@yahoogroups.com , "Joigaloid" <andre_sand@> wrote:
> > >
> > >
> > >
> > > Hi jleroux2010:
> > >
> > > Unfortunately, the Preliminary Operations Guide doesn't seem to contain what you describe (if I understand correctly). The guide has about a dozen or so illustrations of what the Matrix-12 VFD displays show during various operations, but nowhere near a full 59 illustrations of all the pages and sub-pages. The Preliminary Operations Guide is really a small subset of what was later published in the full Matrix-12 Owners Manual.
> > >
> > > I will post a sample in the files section if you think it will clarify what I mean.
> > >
> > > Good luck on your search! If I come across something that matches your description, I will post it here.
> > >
> > > - as
> > >
> > > --- In oberheim@yahoogroups.com , "jleroux2010" <jleroux2010@> wrote:
> > > >
> > > > Hi Joigaloid,
> > > > Thank you for your feedback about the manuals.
> > > >
> > > > Is it possible to confirm if the "Preliminary Operations Guide"
> > > > shows all the layouts for each of the 59 pages and sub-pages
> > > >
> > > > Thank you.
> > > >
> > > > --- In oberheim@yahoogroups.com , "Joigaloid" <andre_sand@> wrote:
> > > >
> > > > > Hello jleroux2010:
> > > > >
> > > > > I am a new user to the group and will contribute where I can.
> > > > >
> > > > > When I got my Matrix-12, I received a Preliminary Operations Guide, of about 30 pages. Later, Oberheim shipped me a full Matrix-12 Owner's Manual, about 200 pages. Still later, after the retro fit, they gave me a Pressure Sensitivity Owner's Manual Addendum. I have (paper) copies of all of these.
> > > > >
> > > > > I am not familiar with a supplement such as you describe. Could it be one of the ones I listed above
> > > > >
> > > > >
> > > > >
> > > > > --- In oberheim@yahoogroups.com , "jleroux2010" <jleroux2010@> wrote:
> > > > > >
> > > > > > Hi
> > > > > >
> > > > > > I am looking for the "Matrix-12 Owner`s Manual Supplement" that was included with the Matrix-12 Owner manual. It is listing all the 59 pages's display (diagrams) for programming the Matrix-12.
> > > > > >
> > > > > > Any idea where can I find a copy in PDF format
> > > > > >
> > > > > > Thank you.
> > > > > >
> > > > >
> > > >
> > >
> >
>