Thank you for the quick replies.

Best regards
Jari Jokinen

--- In Doepfer_a100@yahoogroups.com , Florian Anwander
<Florian.Anwander@...> wrote:

>
> Hi
>
> one could add a larger cooling device to the regulator, but I

assume

> this would cause mechanical problem in transport (too much mass).
>
> Florian
>
> selfoscillate wrote:
> > hello chuck,
> >
> > only one ad5 is allowed per row.
> > as long as the total 5 volts consumption of the modules
> > doesn't exceed 100ma you can use more than 1 module
> > with the ad5. in the example below (a113 and a190)
> > the 5 volts consumption is 150 ma, therefore you need
> > two ad5.
> >
> > best wishes
> >
> > ingo
> >
> >
> >
> > --- In Doepfer_a100@yahoogroups.com , "charles graef"
> > <vogelscheiss@> wrote:
> >
> >>Sorry, I'm confused -- you're saying that the A-100AD5 will only
> >
> > permit one
> >
> >>5V module in the row in which it's installed
> >>
> >>--Chuck
> >>
> >>-----Original Message-----
> >>From: Doepfer_a100@yahoogroups.com
> >
> > [mailto: Doepfer_a100@yahoogroups.com ] On
> >
> >>Behalf Of hardware@
> >>Sent: Friday, December 14, 2007 10:12 AM
> >>To: Doepfer_a100@yahoogroups.com
> >>Subject: AW: 1 5V Low-Cost Adapter questions
> >>
> >>
> >>>I have two 5V Low-Cost Adapters (A-100AD5). I have previously
> >
> > used them
> >
> >>>with A-113 and A-190 installed in separate A-100G6 cabinets.
> >>>
> >>>Now I am going to put A-113 and A-190 into same cabinet. Looking
> >
> > at the
> >
> >>>power consumption figures it appears, that two A-100AD5 are still
> >>>needed. Just to make to make sure, I would like to ask, how
> >
> > should the
> >
> >>>A-100AD5:s be installed, when
> >>>- A-113 and A-190 are in the same row/power rail.
> >>
> >>Sorry, that's not possible as only one A-100AD5 is allowed for

each

> >
> > bus
> >
> >>board.
> >>
> >>
> >>>- A-113 and A-190 are in different rows.
> >>
> >>That's the right solution. Simple connect one A-100AD5 on each

bus

> >
> > board.
> >
> >>Best wishes
> >>Dieter Doepfer
> >>
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
> --
> Florian Anwander |ConSol
> Tel. +49(89)45841-133 |Consulting&Solutions Software

GmbH

> Fax +49(89)45841-111 |Franziskanerstr. 38, D-81669

München

> email: florian.anwander@... | http://www.consol.de
>