Thanks Peter. Ya, that's what I was planning to do, put the A129/3
next to one of my A138a mixers.

I have a question about the A163 VC Divider, one of the other modules
I'm considering. The User's Guide says that to obtain a DC coupled
output, the module can be modified by adding a jumper to short out the
cap C7. I'd like to use the A163 as a VC clock divider. What would I
be giving up if I jumper the capacitor

Joe

--- In Doepfer_a100@y..., "(i think you can figure that out)"
<petergrenader@h...> wrote:

> The A129/3 IS AN EXTEMELY USEFUL MODULE!!!!!
>
> It allows for full processing of control voltages. What I suggest

you

> do however is (if you have one, if not this also recommended for the
> A129/3) is place a A138a cv mixer next to it, so you can easily mix

the

> prcoessed CVs as well.
>
> I don't own an A129/3. I ave built two processors that do the same
> thing -and- i own two Blacet mixer/processors that to this plus

mixing

> and I use them continually.
>
> Peter
>
>
>
>
> --- In Doepfer_a100@y..., unknown freak <ospengler@r...> wrote:
> > This is a really idiosyncratic question.
> >
> > That said, I use my A129/3 a LOT.
> >
> > > -----Original Message-----
> > > From: Joe Buechler [mailto:buechlerjoe@t...]
> > > Sent: Wednesday, September 25, 2002 10:56 AM
> > > To: Doepfer_a100@y...
> > > Subject: 1 Suggestions for what to do with 24HP
> > > (or maybe 32)
> > >
> > >
> > > If I replace my A190/A191 with an MCV24, I'll have 24HP of space
> > > suddenly available. I could maybe extend that to 32HP if I lose

the

> > > A115 audio divider, which I don't use very often.
> > >
> > > Anyone have any good suggestions on how I might use this space
> > >
> > > I'm considering the VC mixer (maybe with the morphing

controller).

> > >
> > > Another possibility is the A129/3 attenuator/offset module which
> > > might be really useful. I generally use a mixer and CV source

for

> > > attenuation and offset, which would be free'd up.
> > >
> > > Maybe just an assortment of miscellaneous 8HP modules - I'm

somewhat

> > > interested in the freq shifter, the logic module, maybe the

analog

> > > version of the ribbon controller module instead of getting the

midi

> > > version.
> > >
> > > Comments Suggestions
> > >
> > > Joe
> > >
> > >
> > >
> > >
> > > ------------------------ Yahoo! Groups Sponsor
> > > ---------------------~--> Sell a Home with Ease!
> > > http://us.click.yahoo.com/SrPZMC/kTmEAA/MVfIAA > /QnLolB/TM
> > >
> > >
> > > --------------------------------------------------------------
> > > -------~->
> > >
> > > To unsubscribe from this group, send an email to:
> > > doepfer_a100-unsubscribe@y...
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >