This sounds like a good idea indeed, but, what's the difference in
use between using a VC-LFO and the modded A163. I don't really
geddit, but I don't have any fequency divders to check it out also..

Greetings, Zameer

--- In Doepfer_a100@y..., "Joe Buechler" <buechlerjoe@t...> wrote:
> Thanks Peter. Ya, that's what I was planning to do, put the A129/3
> next to one of my A138a mixers.
>
> I have a question about the A163 VC Divider, one of the other
modules
> I'm considering. The User's Guide says that to obtain a DC coupled
> output, the module can be modified by adding a jumper to short out
the
> cap C7. I'd like to use the A163 as a VC clock divider. What would
I
> be giving up if I jumper the capacitor
>
> Joe
>
> --- In Doepfer_a100@y..., "(i think you can figure that out)"
> <petergrenader@h...> wrote:
> > The A129/3 IS AN EXTEMELY USEFUL MODULE!!!!!
> >
> > It allows for full processing of control voltages. What I
suggest
> you
> > do however is (if you have one, if not this also recommended for
the
> > A129/3) is place a A138a cv mixer next to it, so you can easily
mix
> the
> > prcoessed CVs as well.
> >
> > I don't own an A129/3. I ave built two processors that do the
same
> > thing -and- i own two Blacet mixer/processors that to this plus
> mixing
> > and I use them continually.
> >
> > Peter
> >
> >
> >
> >
> > --- In Doepfer_a100@y..., unknown freak <ospengler@r...> wrote:
> > > This is a really idiosyncratic question.
> > >
> > > That said, I use my A129/3 a LOT.
> > >
> > > > -----Original Message-----
> > > > From: Joe Buechler [mailto:buechlerjoe@t...]
> > > > Sent: Wednesday, September 25, 2002 10:56 AM
> > > > To: Doepfer_a100@y...
> > > > Subject: 1 Suggestions for what to do with 24HP
> > > > (or maybe 32)
> > > >
> > > >
> > > > If I replace my A190/A191 with an MCV24, I'll have 24HP of
space
> > > > suddenly available. I could maybe extend that to 32HP if I
lose
> the
> > > > A115 audio divider, which I don't use very often.
> > > >
> > > > Anyone have any good suggestions on how I might use this
space
> > > >
> > > > I'm considering the VC mixer (maybe with the morphing
> controller).
> > > >
> > > > Another possibility is the A129/3 attenuator/offset module
which
> > > > might be really useful. I generally use a mixer and CV source
> for
> > > > attenuation and offset, which would be free'd up.
> > > >
> > > > Maybe just an assortment of miscellaneous 8HP modules - I'm
> somewhat
> > > > interested in the freq shifter, the logic module, maybe the
> analog
> > > > version of the ribbon controller module instead of getting
the
> midi
> > > > version.
> > > >
> > > > Comments Suggestions
> > > >
> > > > Joe
> > > >
> > > >
> > > >
> > > >
> > > > ------------------------ Yahoo! Groups Sponsor
> > > > ---------------------~--> Sell a Home with Ease!
> > > > http://us.click.yahoo.com/SrPZMC/kTmEAA/MVfIAA > /QnLolB/TM
> > > >
> > > >
> > > > --------------------------------------------------------------
> > > > -------~->
> > > >
> > > > To unsubscribe from this group, send an email to:
> > > > doepfer_a100-unsubscribe@y...
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >