Thanks very much for your answers Dieter, it really helped me out.

The (strange) story....When I pulled out the 184-1 I had back my -12V, now the strange thing, when I plugged it back in, I kept the -12V, so everything is ok now.

Now I'm a 99% sure the module was build in right...I always check at least 5 times...

Strange....but thanks very much for the help, this way it was fixed in a few minutes.

Have a nice time,

------------------------------------------------------
Danny Budts

[ mailto: info@... | info@... ]

[ http://www.syndromeda.be/ | www.syndromeda.be ]
[ http://www.syndromeda.be/ ]
[ https://www.facebook.com/Syndromeda | https://www.facebook.com/Syndromeda ] [ https://www.facebook.com/Syndromeda ]

https://www.facebook.com/SyndromedaPhoto/

[ https://syndromeda.bandcamp.com/ | https://syndromeda.bandcamp.com/ ] [ https://syndromeda.bandcamp.com/ ]

----- Oorspronkelijk bericht -----
Van: " yahoo@... [Doepfer_a100]" < Doepfer_a100@yahoogroups.com >
Aan: "Doepfer a100" < Doepfer_a100@yahoogroups.com >
Verzonden: Maandag 17 juli 2017 09:40:04
Onderwerp: AW: 1 A-134-1 problem

Hello,

I'm sorry about the problems with the module. I cannot remember that we ever
had a similar problem. The LED should not blink unless an external CV (e.g.
from an LFO) is applied. I suppose that the module has to be repaired and
follow the repair notes on the FAQ page of our website:

www.doepfer.com > English > FAQ > General > Repair procedure

If you are familiar with electronics the DIY repair notes may help:

www.doepfer.com > English > FAQ > A-100 > DIY repair tips

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto: Doepfer_a100@yahoogroups.com ]
> Gesendet: Sonntag, 16. Juli 2017 19:09
> An: Doepfer_a100@yahoogroups.com
> Betreff: 1 A-134-1 problem
>
> Since today, when I start-up my system there's one 134-1 with a strange

behaviour.

> When the module starts up the two leds are blinking, and they
> will go blinking faster and faster until both keep lit. When I
> turn the panning-pot, nothing happens, they both keep lit, as
> connected to a LFO....nothing....
> Anyone any idea
> Cheers and thanks,
> Danny

------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links