At first sight I could not see that the A-161 manual says that +5V appear at
the outputs. In this case the manual would be wrong. The high state of the
A-160 and A-161 outputs are close to +12V. It does not matter within the
A-100 because any voltage beyond about +3V is treated as logical "high" (+5V
as well as +12V) from any digital input (e.g. gate, clock, reset).

Best wishes
Dieter Doepfer

P.S. Please tell me where you found the +5V remark so that we can correct
the manual.

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag von Keld Sørensen
> Gesendet: Dienstag, 26. Juli 2005 13:30
> An: Doepfer_a100@yahoogroups.com
> Betreff: 1 A-161clock sequencer.
>
>
> Hi all.
> I just put an volt meter to the output of my A-161 checking the
> voltage. My A-161 puts out +11.38 Volts when active - the manual says
> +5 Volts. Is this a fault in my system
>
> Keld