hi duff,
thanks for your measures...i don't have a voltometer
so i beleive the values that you measured arer
correct.so,triggers(7-8volts)are a mystery...why won't
they work with the a150 the gate i have tested comes
from the kenton pro-2000 and it's 0 to +5volts,so,it's
expected to work o.k.,with the a150......more tests
need to be done...
synthfreak


--- duffnuff < duffnuff@... > wrote:

> bakis,
> hmm, your comment prompted me to measure these
> voltages. to my
> surprise, here are the results: (i'm sure there's
> some variance from one
> module to the next as well)
>
> A155 triggers send 7-8v and the GATE sends 10v
> A162 TRIG output is 10v
> A177 foot controller GATE output is 12v (!!)
> A178 theremin gate output is 8v,
> A190 gate output is 10 v.
> and just to make sure i'm not hallucinating, a 9v
> battery reads output of 9v.
>
> so i don't know what's up w these reported specs..
>
> the A129/3 must have slipped by me somehow, never
> realized the potential of
> this module outside a vocoder system, and i now see
> it as a necessity. yikes!
> duff
>
>
>
> -- In Doepfer_a100@y..., bakis Sirros
> <synth_freak_2000@y...> wrote:
> > hi dugg,
> > i don't think that this will help because the
> problem
> > is that the triggers from the a155 are from 0 to
> > +12volts and that's the problem(gates are from 0
> to +5
> > volts)...but i think attenuating them with the
> a129/3
> > will be the solution...
> > synthfreak
> >
> > --- duffnuff <duffnuff@h...> wrote:
> > > --- In Doepfer_a100@y..., bakis Sirros
> > > <synth_freak_2000@y...>
> > > wrote:
> > > > no,RM,
> > > > i mean that,if i connect one of the triggers
> > > output of
> > > > my a155 to the i/o jacks of the a150 ,that
> they
> > > pass
> > > > right thru the switch...not in the CV jack.
> > > > bakis.
> > >
> > >
> > > bakis,
> > > i dont have a 150 to see what you mean..but if
> you
> > > have a 162
> > > does that help (maybe this has already been
> > > suggested) i use
> > > the 162 on the 155 trigs to turn them into gate
> > > signals when
> > > necessary. set delay time to '0' and vary the
> > > length to set gate
> > > time.
> > > duff
> > >
> > >
> >
> >
> > =====
> > synthfreak(parallel worlds)
> > athens-greece
> > 1 group owner-moderator
> >
> > __________________________________________________
> > Do You Yahoo!
> > Yahoo! Greetings - Send FREE e-cards for every
> occasion!
> > http://greetings.yahoo.com
>
>

=====
synthfreak(parallel worlds)
athens-greece
1 group owner-moderator

__________________________________________________
Do You Yahoo!
Yahoo! Greetings - Send FREE e-cards for every occasion!
http://greetings.yahoo.com