Thanks. I will wire it up this weekend (need some serious time to navigate the cable nest behind the racks).

You mentioned the possibility of MIDI loops, which I have dealt with in the past. But that leads me to wonder:

QUESTION: Is there ever a need to route synth MIDI OUT to Patch Editor IN (at least with my MKS units- 50/70/80)? I ask because my Roland PG-10 (for the D-110) requires 2-way communication between the programmer and the synth. Or is the Patch Editor entirely 1-way (PE OUT to synth IN only)?

--- In kiwitechnics@yahoogroups.com , Kiwitechnics <yahoogroups@...> wrote:
>
> If you use the midi thru ports on your synths you will not get delays as
> the internal connection is directly from the midi in to the midi through
> port. Put each synth on a different midi channel and use the midi though
> ports. A workable setup might be PC>MOTU>PE>Synth1>synth2 etc
>
> Ableton Live does not support sysex so you will not be able to record PE
> movements. I am not sure about Cubase. You setup shown could also allow
> midi loops which you need to avoid.
>
> MH
>
>
> On 6/07/2013 8:52 p.m., justjoshpdx wrote:
> >
> > I purchased a KiwiTechnics Patch Editor to program my Roland MKS-50,
> > MKS-70, and MKS-80 rack units, since I don't have the original
> > hardware programmers for any of them.
> >
> > I have been unsuccessful, so far, getting the Patch Editor to
> > communicate with the devices as I had hoped. All my MKS units are
> > connected to MOTU USB-to-MIDI interfaces. I have a Roland A-49
> > keyboard controller connected to my DAW PC via a USB hub. I am able to
> > play the Roland keyboard and trigger all of the MKS units in my
> > current setup. However, my Patch Editor does not seem to be
> > communicating with my devices when hooked up to the MOTU interfaces. I
> > am including a diagram to my current setup. It shows the current USB
> > and MIDI routings (blue = USB, red = MIDI in/out). The Patch Editor is
> > connected to in/out ports on the MOTU Micro Lite. I want to be able to
> > use the one patch editor to program any of my three target MKS units,
> > but I've not gotten it to work yet through either Ableton Live 9 or
> > Cubase 6/7.
> >
> > So my question is: How do people have their MIDI and/or USB set up
> > when using the Patch Editor with multiple MIDI instruments? I'd like
> > to avoid MIDI daisy-chaining if possible.
> >
> > Picture of my setup: http://i.imgur.com/eF0OHiS.png
> >
> >
>
> --
> Kind Regards
> Murray
> info@...
> www.kiwitechnics.com
>

-- Kind Regards Murray

info@...



www.kiwitechnics.com